Paste/Ink/Paint

    Our graphene pastes and inks with excellent conductivity have been released in the HICON series with volatile/non-volatile lines and various viscosities to meet various uses.
HIST series protects the object from high temperature heat and has nonflammable, flame-retardant, and insulating functions.
The HIST-C type is designed from the viewpoint of protection and maintenance, and the HIST-P type is designed from the viewpoint of safety.
It is applicable for flexible printed circuit boards(FPCB)/flexible electrodes, parts, medical sensors, functional fabrics, solar cells, displays, quick-drying spray solvents, functional exterior/interior coatings, etc.

Paste

1.HICON-T

Non-volatile/High-viscosity/Conductive Paste

Characteristics and functions
• Type: Gel
• Graphene: 15 wt%
• Sheet resistance: 10 Ω/sq at 25 ㎛ thickness
• Conductivity: 2.5×10-2 Ω·㎝
• Viscosity: 350 cP (±50 cP, measuring temperature: 25 °C)
• Curing conditions: 120 °C/1hour
• Curing conditions for high temperature use (over 400°C):
      First step: 120 °C, 1hour
      Second step: 450 °C, 1hour
• Hardness: 3 H
• Maximum available temperature: 900 °C
• Recommend temperature: 700 °C
• As conductive adhesives for high temperatures: 450 °C
• Applied materials: Metals, semiconductors, wood, glass, etc
• Life waterproof/silk screen available

Recommended for use
Electrode material: Medical/SOFC for/Capacitor, Electric car battery materials, Challenge reinforcement, Circuit repair, High-frequency shield, Graphene Hybrid Energy, High temperature conductive adhesive

2.HICON-N

Non-volatile/Mid-viscosity/Conductive Graphene Paste

Characteristics and functions
• Type: Paint
• Graphene: 16 wt%
• Sheet resistance: 29.6 Ω/sq at 25 ㎛ thickness
• Conductivity: 7.40×10-2 Ω·㎝
• Viscosity: 550 cP (±50 cP, measuring temperature: 25 °C)
• Curing conditions: 120 °C, 1 hour
• Hardness: 3 H
• Maximum available temperature: 350 °C
• Applied materials: Metals, semiconductors, wood, glass, etc
• Very good diffusion/ moderate waterproofing .
• when silk screening – Enough applying time & workability
• Life waterproof
• Silk screen available



Recommended for use
Electrode material: Medical/SOFC/Capacitor, Electric vehicle battery material, Challenge reinforcement, Circuit repair, High frequency shield, Graphene hybrid energy

3.HICON-V

Volatile/Flexible/Conductive Graphene Paste

Characteristics and functions
• Type: Paste
• Graphene: 16 wt%
• Sheet resistance: 99.6 Ω/sq at 25 ㎛ thickness
• Conductivity: 2.49×10-1 Ω·㎝
• Viscosity: 550 cP (±50 cP, measuring temperature: 25 °C)
• Curing conditions:
      Surface: 5 secs
      Fully dry: 25 °C,30 mins or 60~80 °C, 10 mins
• Hardness: 6 B
• Maximum available temperature: 200 °C
• Applied materials: Metals, semiconductors, wood, glass, etc
(*limited plastic and foam substrates)
• Very good diffusion/strong waterproofing
• Excellent adhesion
• Quick drying point: 5 secs
• Strong in water condition
• Limited silk screen available
• Limited 3D printing available
• FPCB(Flexible Printed Circuit Board) available

Recommended for use
Conductive adhesive, Conductive ink, Flexible printed circuit board (FPCB), Medical sensor, Functional fabric, Solar cell, 3D printer solvent

Ink

4.HICON-I

Volatile/Flexible/Conductive Graphene Ink

Characteristics and functions
• Type: Paint
• Graphene: 12 wt%
• Sheet resistance: 99.6 Ω/sq at 25 ㎛ thickness
• Conductivity: 2.49×10-1 Ω·㎝
• Viscosity: 200 cP (±30 cP, measuring temperature: 25 °C)
• Curing conditions:
      Surface: 20 secs
      Fully dry: 25 °C, 30 mins or 60~80 °C, 10 mins
• Hardness: 6 B
• Maximum available temperature: 200 °C
• Applied materials: Metals, semiconductors, wood, glass, etc
(*limited plastic and foam substrates)
• Good diffusion/Strong waterproofing/Excellent adhesion
• Excellent adhesion
• Quick drying point: 20 secs
• Strong in water condition
• Limited silk screen available
• Limited 3D printing available
• FPCB(Flexible Printed Circuit Board) available

Recommended for use
Conductive adhesive, Conductive ink, Flexible printed circuit board (FPCB), Medical sensor, Functional fabric, Solar cell, 3D printer solvent

5.HICON-S

Volatile/Flexible/Conductive Graphene Liquid for Spray

Characteristics and functions
• Type: Ink for Spray
• Graphene: 4 wt%
• Sheet resistance: 99.6 Ω/sq at 25 ㎛ thickness
• Conductivity: 2.49×10-1 Ω·㎝
• Viscosity: 150 cP (±30 cP, measuring temperature: 25 °C)
• Curing conditions:
      Surface: 50 secs
      Fully dry: 25 °C, 30 mins or 60~80 °C, 10 mins
• Hardness: 6 B
• Maximum available temperature: 200 °C
• Applied materials: Metals, semiconductors, wood, glass, etc
(*limited plastic and foam substrates)
• Good diffusion/Strong waterproofing/Excellent adhesion
• Excellent adhesion
• Quick drying point: 60 secs
• Strong in water condition
• Limited silk screen available
• Limited 3D printing available
• FPCB(Flexible Printed Circuit Board) available

Recommended for use
Conductive adhesive, Conductive ink, Flexible printed circuit board (FPCB), Medical sensor, Functional fabric, Solar cell, 3D printer solvent

Functional Paint / Paste

1.HIST-C

Heat control master

Protects against heat through phase transformation of the paint and air bubbles when used at high temperatures.

Characteristics and functions
• Type: Paint
• Solid content: 34 wt%
• Conductivity: 4.70×1012
• Viscosity: 700 cP (±50 cP, measuring temperature: 25 °C)
• Curing conditions: 120 °C, 1 hour
• Hardness: 6 H or more
• Applied materials: Metals, semiconductors, wood, glass, plastic, foam etc
• Good diffusion/ (after drying) Life water proofing
• Flame retardant, Nonflammable
• High temperature heat Emission/Reflecting
• Excellent adhesion
• Electrical insulation
• Applicable by thickness
• Protection against outside heat
• By Thickness The ability to dissipate heat and bounce the heat change when high temperatures are applied

Recommended for use
Construction, Vehicle, Device, Flame retardant, Nonflammable, External heat absorber/Release agent, Heat reflector

2.HIST-CS

Heat control master

Possible to apply thinly spraying.
The level of protection against heat can be adjusted by the coating thickness.

Characteristics and functions
• Type: Spray level, Sprayable
• Solid content: 13 wt%
• Conductivity: 4.70×1012 Ω·㎝
• Viscosity: 50 cP (±20 cP, measuring temperature: 25 °C)
• Curing conditions: 120 °C, 1 hour
• Hardness: 6 H or more
• Applied materials: Metals, semiconductors, wood, glass, plastic, foam etc
• Good diffusion/ (after drying) Life water proofing
• Flame retardant, Nonflammable
• High temperature heat Emission/Reflecting
• Excellent adhesion
• Electrical insulation
• Applicable by thickness
• Protection against outside heat



Recommended for use
Construction, Vehicle, Device, Flame retardant, Nonflammable, External heat absorber/Release agent, Heat reflector

3.HIST-P

High protection from heat

Protects against heat through phase transformation of the paint and air bubbles when used at high temperatures.
The level of protection against heat can be adjusted by the coating thickness.

Characteristics and functions
• Type: Paint
• Solid content: 45 wt%
• Conductivity: 2.83×1012 Ω·㎝
• Viscosity: 1148 cP (±50 cP, measuring temperature: 25 °C)
• Curing conditions: 120 °C, 1 hour
• Hardness: 6 H or more
• Applied materials: Metals, semiconductors, wood, glass, plastic, foam etc
• Good diffusion/ (after drying) Life water proofing
• Excellent adhesion
• Heat shield
• Strongly Flame retardant
• Insulation
• Electrical insulation
• Nonflammable
• Life Waterproof
• Even applied thin thickness, Maintain excellent performance

Recommended for use
Aviation/Ship, Electrical device, Construction, Vehicle, Device, Flame retardant, Nonflammable External heat absorber/Release agent, Heat reflector.

4.HIST-PS

High protection from heat

Possible to apply thinly spraying.
The level of protection against heat can be adjusted by the coating thickness

Characteristics and functions
• Type: Spray level, Sprayable
• Solid content: 23 wt%
• Conductivity: 2.83×1012 Ω·㎝
• Viscosity: 80 cP (±30 cP, measuring temperature: 25 °C)
• Curing conditions: 120 °C, 1 hour
• Hardness: 6 H or more
• Applied materials: Metals, semiconductors, wood, glass, plastic, foam etc
• Good diffusion/ (after drying) Life water proofing
• Excellent adhesion
• Heat shield
• Strongly Flame retardant
• Insulation
• Electrical insulation
• Nonflammable
• Life Waterproof
• Even applied thin thickness, Maintain excellent performance


Recommended for use
Aviation/Ship, Electrical device, Construction, Vehicle, Device, Flame retardant, Nonflammable External heat absorber/Release agent, Heat reflector.